CONCRETE FACTS: LEARN HOW TO USE SUPER MUD DRILLING FLUID
NON-CEMENT SUPER MUD MIXTURES ARE GREAT FOR DRILLING PRACTICES
Our industry-leading Magnacore product line offers a successful solution for a Self-Drilling Anchor application. Read on to learn how your company can use our Super Mud mixture for Hollow Bar drilling success.
- Product Family MAGNACORE
- Subcategory ELEMENT
- TIP Category DESIGN
- Tags CONCRETE, ADMIXTURES, GROUT
CONCRETE FACTS: Compressive Strength VS Curing Time
The table below showcases an estimate of the compressive strength of concrete as it relates to the number of days since it was initially poured.
DID YOU KNOW?
Days Until Concrete is 99% Compressive
0
| Days | Compressive Strength |
|---|---|
| 1 Day | 16% |
| 3 Day | 40% |
| 7 Day | 65% |
| 14 Day | 90% |
| 28 Day | 99% |
Grout admixtures or replacements for drilling:
- 1. Super mud is a non-cementitious material commonly used in drilling. It is used to constantly flow through the center of the drill to flush out dirt and rock to
prevent clogging. - 2.Flushing grout is another technique used like super mud, to keep the drill clear from any clogging. Flushing grout uses a low cement to water ratio to maintain a higher consistency than water but a lower consistency than structural grout.
- 3.Super plasticizer is another admixture that can be added to a concrete mixture. Super plasticizers reduce the amount of water needed in the mix, and in turn increase the cement’s strength by increasing the density and lowering the permeability
If you need more assistance…
Please reach out via email at info@intechanchoring.com or at our Office Phone at (800) 223-7015
