Golf Course Drainage System
Hydraway Drainage Systems from Intech Anchoring Systems can be widely used throughout a golf course. Hydraway can be installed in tee boxes, fairways, and greens to alleviate saturation problems that exist on most courses.
Why Hydraway for Golf Course Drainage
Hydraway design allows the greatest amount of water inflow in the industry. Hydraway’s unique core design allows over 90% intake of water from all directions. Over 66 square inches per foot are open for water intake. If water has to seek holes to enter the drain, the system can’t fill up fast enough to move the water away effectively. Hydraway has no holes for water to get into. Underneath the heavy non-woven fabric is an HDPE core in a grid pattern that quickly allows water to enter and drained fast.
- Faster drainage means keeping the courses available
- Ease of installation as a simple trench machine will do the job or you can hire specialty turf contractors who have special equipment that will install Hydraway in a narrow 2” trench, up to 3,000 lineal feet per day.


Why Choose Hydraway?

STRENGTH
Industry’s highest compressive strength

IN-FLOW RATE
Industry’s highest in-flow rate

LONG LIFE
Industry’s highest compressive strength

0% FAIL
No known product failures

LABOR SAVINGS
Ease of installation means lower total installed cost

70% FASTER
Removes water 70% faster than traditional methods of drainage
Hydraway comes in widths of 6 and 12 inches with a standard length of 150 feet — but can be customized in a variety of lengths and widths.
Hyraway is an industry-leading, innovative technology designed for rapid dewatering of golf courses.
it should be protected with proper drainage. But whether installing a new drainage system or retrofitting an
existing one, it should have minimal impact on the land, and the game.
Hydraway drainage system has a unique design and installation process that is more versatile than conventional perforated pipe systems, ensuring minimal disruption. And with the industry’s highest inflow rates and compressive strength, you can be sure your course – and tee time – will be protected for years to come.
Unique Installation
Golf courses that use a classic perforated drain pipe system experience less effective drainage and run a risk of clogging or worse, failure.
Hydraway’s unique design and installation process are tailored for a green, fairway, or sand cap. We design and customize the system for your unique application.
Our goal is your goal: Protect the course and provide a consistent experience for the players.
Property | Test Method | Unit of Measurement |
---|---|---|
GEOTEXTILE1 - NEEDLE-PUNCTURED, NONWOVEN | ||
Elongation | ASTM D-4632-91 | 50% |
Grab Tensile | ASTM D-4632-92 | 120 lbs |
Flow Rate | ASTM D-4491 | 135 gal/mn/ft2 (3) |
CORE - HDPE | ||
Compressive Strength | ASTM D-695/1621 (4) | 11,400 PSF |
Flow Rate at 1,500 PSF | ASTM D-47162 (2) | 21 GPM/ft-width |
Peel Strength (3) | ASTM D-1876 | 50 lbs/ft-width |
- 4 oz fabric
- Gradient of 0.1
- Values shown are in weaker principal direction. Minimum average roll values are calculated as the typical minus two standard deviations. Statistically, it yields a 97.7% degree of confidence that nay samples taken from quality assurance testing will exceed the value reported.
- Modification was made to an existing ASTM test since a recognized test method had not been established for this type of product at time of testing.