Foundation Repair Products: Helical Piers, Push Piers & Equipment
Foundation movement can start small and spread quickly: a basement wall begins to bow, a footing settles, a slab drops, or stair-step cracks show up around openings. Contractors and engineers need products that address the specific failure mode, install efficiently, and support a long-term load path instead of a temporary patch.
Intech Anchoring Systems is a distributor of foundation repair products and equipment, including helical piers, push piers (resistance piers), wall anchors, crack repair systems, and drainage solutions, for residential, commercial, and industrial contractors and engineers. Whether the project calls for underpinning, structural stabilization, crack repair, or moisture control, the right solution starts with matching the product to the condition.
Call Intech Anchoring Systems at (888) 458-8904 to discuss foundation repair products and get straightforward pricing.
Foundation Repair Product Benefits for Stabilization and Structural Support
The right foundation repair product solves the right problem. Wall reinforcement products help resist lateral soil pressure and limit continued inward movement. Underpinning products, helical piers and push piers alike, help transfer structural load to more competent bearing conditions when shallow soils cannot support the structure. Support products help restore carrying capacity under beams and floor systems when settlement or deterioration creates sagging and bounce.
Foundation repair products also help crews plan work with fewer surprises. When brackets, sections, and connection hardware are designed to work together, installation becomes more repeatable and easier to document. That consistency supports better scheduling, clearer closeout reporting, and more predictable results across different soil profiles and structural layouts.
Foundation Repair Products for Common Structural Conditions
Find Foundation Repair Products For Any Application:
Foundation repair is not one category, it’s a toolkit. Different failure modes call for different systems, and matching the product to the problem is what separates a reliable repair from one that needs to be redone. Intech Anchoring Systems supports product needs across four primary foundation repair categories.
Underpinning: Helical Piers & Push Piers
When shallow soils cannot support the structure and settlement has created visible movement, underpinning transfers the structural load to more competent bearing conditions below. The two most common systems are helical piers, which are torqued into the soil on a screw-like shaft, and push piers (also known as resistance piers), which are hydraulically driven straight down using the structure’s own weight as a reaction force. Intech supplies both, along with helical piers, push/resistance piers, pier and beam support systems, and grouted helical micropiles. Project conditions, including soil profile, structure weight, access, and load requirements drive which system is the right fit.
Structural Stabilization
For foundation walls showing inward movement, bowing, or leaning, structural stabilization products help resist lateral soil pressure and limit continued displacement. Intech supplies wall anchors, wall brace systems, bowing and leaning wall support products, and support column systems for beam and floor applications where settlement or deterioration has reduced carrying capacity.
Crack Repair
Foundation cracks can signal underlying structural movement or create pathways for water intrusion that compound the original problem. Intech supports crack repair product needs including crack repair injection systems and carbon fiber crack repair solutions that seal and stabilize affected areas.
Drainage and Moisture Control
Moisture is one of the most common contributors to foundation problems. Redirecting water away from the foundation and managing subsurface moisture helps protect stabilization work and reduce the risk of future movement. Intech supports drainage and moisture control product needs including basement and foundation waterproofing systems, crawl space encapsulation, dehumidifiers, and sump pump and basin systems.
We also provide installation training & support!
Helical Pier & Push Pier Installation Equipment
Every underpinning system on this page is backed by the drive heads, drill rigs, and hydraulic installation equipment needed to put it to work, and is available to rent or purchase.
Read More
Foundation Repair Product Selection Process
Choosing the right product starts with confirming the failure pattern and matching the repair to site conditions. Intech Anchoring Systems supports a straightforward approach that helps contractors and project managers align product choice, quantities, and installation needs early.
- Assess the condition: We help your team identify wall movement, settlement zones, slab drop, or support failures that define the repair scope.
- Match the product to the problem: We support product selection across helical piers, push/resistance piers, bracing, anchoring, crack repair, and moisture control based on the root structural demand.
- Plan access and sequencing: We help confirm excavation needs, interior clearance, and staging so installation stays efficient.
- Coordinate connection points: We supply brackets, caps, and attachment hardware aligned with the structure so load transfer remains direct.
- Confirm quantities and layout: We support spacing and placement planning that produces consistent reinforcement and balanced load distribution.
- Verify installation readiness: We help your team review tooling needs, jobsite logistics, and equipment requirements before mobilization.
- Keep procurement clear: We provide straightforward pricing so scope decisions stay grounded before orders are finalized.
Request Pricing for Your Project
FAQs About Foundation Repair Products
What’s the difference between helical piers and push piers?
Helical piers are torqued into the soil on a shaft with helical plates that pull the pier into the ground, making them a good fit for lighter structures and situations where soil conditions support strong anchoring. Push piers, also called resistance piers, are hydraulically driven straight down using the structure’s own weight as reaction force, which makes them well-suited to heavier buildings and deeper bearing requirements. Both are proven underpinning methods; the right choice depends on structure weight, soil profile, and access.
What foundation repair products help stabilize a bowing basement wall?
Common options include wall anchors, wall bracing systems, and carbon fiber wall reinforcement. The best choice depends on wall type, movement severity, access, and whether the goal is stabilization only or long-term reinforcement.
What products help address foundation settlement?
Underpinning products such as helical piers and push/resistance pier systems help transfer load to more stable bearing conditions. Selection depends on soil profile, structure weight, access, and whether controlled lift is part of the scope.
Can foundation repair products work on both block and poured walls?
Many reinforcement systems are compatible with both wall types, but installation steps differ based on surface condition and joint structure. Planning should account for preparation needs and connection points to ensure consistent reinforcement.
How do I know how many anchors, braces, or piers a project needs?
Quantity depends on wall length, load distribution, and the specific failure pattern. A layout plan typically focuses on spacing that supports even reinforcement and balanced load transfer at the most affected areas.
Do helical piers or push piers require specialized installation equipment?
Yes, helical piers install with torque motors and drive heads, while push piers require hydraulic rams and jacking equipment. Some systems also benefit from specialized limited-access drills in tight footprints. Intech supplies this installation equipment for rent or purchase alongside the products themselves, so crews can source both from a single distributor.
Why Contractors Choose Intech Anchoring Systems for Foundation Repair Products
Product selection is only helpful when it matches field reality. Intech Anchoring Systems supports contractors with helical pier, push pier, and structural stabilization products built for real installation conditions, including constrained access, varied wall types, and projects that require dependable connection hardware.
The focus stays on practical solutions that help stabilize structures, reinforce load paths, and keep crews moving through a consistent install sequence. Intech also provides installation training and support resources so your crew can approach unfamiliar systems with confidence and maintain consistency across the install.
Get Foundation Repair Products From Intech Anchoring Systems
When a structure shows settlement, wall movement, or support failure, the right repair plan starts with the right products. Intech Anchoring Systems supplies helical piers, push piers, wall anchors, crack repair systems, and drainage products, plus the installation equipment to put them to work across a wide range of repair conditions.
Call Intech Anchoring Systems at (888) 458-8904 to discuss your project, explore product options across all repair categories, and get straightforward pricing
